Kessel Comfort PLUS Serie Instructions De Pose Et D'utilisation page 29

Notes on positioning outdoor cabinets
WARNING
Exceeding of the operating temperature can lead to a fault in the control unit.
Take into consideration the place in which the outdoor cabinet is installed
Evaluate the sunshine at the installation site.
Take into account the ambient conditions on site.
The following table gives an overview of the required measures.
Regular strong sunshine for 8 or more hours and/or
accumulation of heated ambient air to be expected
Irregular, at times increased sunshine to be expected
Continuously shaded installation site and/or ambient
conditions with small temperature fluctuations
2.5 Product description
Item Functional components
no.
(1) Main switch
(2) Display and control panel
(3) Type plate
(4) Cable glands, connections
Item Display and control panel
no.
(1) LED Alarm
(2) LED level exceedance
(3) Manual operation, pump 1/2
(4) Open/close motorised flap
(5) Display with error messages
010-700_07
It is necessary to install a cooling unit set for outdoor
cabinets
(Art. no. 681148).
Installation of a standard fan with temperature detection
required to ventilate the interior. Ventilation should start
up from an internal temperature of the control cabinet of
40°C.
No measures required.
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)
(5)
Installation and operating instructions
Fig. 1: Functional components
Main switch
Display and control panel
Type plate
Cable passages, connections
Fig. 2: Display and control panel
LED Alarm
LED level exceedance
Manual operation, pump 1/2
Open/close motorised flap
Display with error messages
29 / 148