Kessel Comfort PLUS Serie Instructions De Pose Et D'utilisation page 39

5.3 Overview of configuration menu
5.4 Carrying out the first initialisation
During the first initialisation, the following inputs are expected:
|Language|
|Date / Time|
|Product type|
|System variant|
|Power rating|
|S1 / S3 operation|
|Maintenance interval|
Language
► Press OK.
► Use the cursor keys to select the language and confirm with OK.
|Date/Time|
Menu appears.
Date / Time
► Set the respective flashing figure in date and time and confirm with OK.
|Product type|
Menu
Product type
► Select product type and confirm with OK.
Selection affects which setting options are available.
|System variant|
Menu
System variant
► Select the product variant. The product variants can be found in the respective manufacturer's documents.
Selection affects which setting options are available.
|S1 / S3 operation|
Menu
S1 / S3 operation
► Select the operating mode. The operating mode is noted in the technical data of the respective pump.
After the last input, the menu
Maintenance interval
► Enter the maintenance interval specified in the standard.
Initialisation is completed, control unit is ready.
Comfort PLUS menu texts
0. System info
1. Information
1.1 Hours of operation
1.2 Log book
1.3 Control type
1.4 Maintenance date
1.5 Current measured values
010-700_07
appears.
appears.
appears.
|Maintenance interval|
1.1.1 Total running time
1.1.2 Run time pump 1
1.1.3 Operating cycles 1
1.1.4 Power outage
1.1.5 Energy usage
1.1.6 Run time pump 2
1.1.7 Operating cycles 2
1.1.8 Backwater phase
1.1.9 Backwater occurrences
1.1.10 Switching cycles flap
1.4.1 Last maintenance
1.4.2 Next maintenance
1.5.1 Mains power
1.5.2 Battery voltage
1.5.3 Level
Installation and operating instructions
appears.
h 0 - 999.999.99
h 0 - 999.999.99
X 0 - 999.999
h 0.0 - 999.999.99
kWh 0.0 - 999.999.99
h 0 - 999.999.99
X 0 - 999.999
h 0.0 - 999.999.99
X 0 - 999.999
X 0 - 999.999
hh:mm:ss - dd.mm.yy
hh:mm:ss - dd.mm.yy
A 0 - 99.9
V 0 - 99.9
mm 0 - 5000
39 / 148