Repacking; Is Your Flotation Device In Good And Serviceable Condition - Mustang Survival M.I.T. 70 Manuel D'utilisation

REPACKING

Repacking should only be done after deflating and re-arming the
flotation device.
1. Fold sides (A) and (B) outward along dotted lines. Engage the
Velcro™ strips (Fig. 10).
2. Make sure the inflator pull-tab hangs out from the bottom of the
folded flotation device.
Fig. 11 depicts a correctly folded flotation device.
A
FOLD SIDES
FIGURE 10
IS YOUR FLOTATION DEVICE IN GOOD AND
SERVICEABLE CONDITION?
Check your flotation device between outings to be sure that it is
properly armed; that it is free of rips, tears, or holes; that all seams
are securely sewn; and that the fabric, straps, and hardware are
still strong. Inspect the inflatable portion of the flotation device in
accordance with "Care and Maintenance," next page.
15
B
CORRECT
FIGURE 11