Cooke & Lewis CLMFBIa Manuel D'utilisation page 48

Lamp replacement
05
Warning!
Ensure the glass is completely cool before removal.
Always disconnect the appliance from the electricity supply before performing maintenance work.
During use the appliance becomes hot. Care should be taken to avoid touching heating elements
inside the oven. Wait until all parts have cooled down.
Important! The bulb in the oven lamp is a special bulb and has high temperature resistance. Replace
only with a bulb of the same type.
For replacement, proceed as follows:
1. Disconnect power from the mains outlet or switch off the circuit breaker of the unit's mains outlet.
2. Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace
the bulb with a new one of the same type. Handle the new bulb with a cloth to avoid risk of
premature failure.
3. Screw the glass lamp cover back in place.
NOTE: Only use 25-40W/220V-240V, T300°C G9 halogen lamps.
48