Selve SE Pro-RC Serie Notice De Réglage page 57

commeo initial operation/Setting by radio
6.2. Functions with one selected motor
 Transmitter in SELECT mode
If a motor with one transmitter has been selected, the following settings can be made.
In SELECT mode
selected motor
STOP 9 s
STOP 6 s
PROG 1 s
PROG 6 s
PROG 9 s
STOP + PROG
3 s
Automatic setup-mode, deletion and automatic
setting of the end positions
 in operation bottom position, top stop/release
(see 6.2.1.)
Manual setup-mode, deletion and manual setting of
the end positions
 in operation bottom position, top position
(see 6.2.2.)
 in operation bottom position, top stop/release
(see 6.2.3.)
Programming/deleting transmitters (see 6.2.4.)
Transmitter programmed  green status LED
Transmitter deleted  red status LED
Delete transmitter table in the receiver (see 6.2.5.)
Reset the receiver to the factory setting (see 6.2.6.)
CONFIGURATION mode
(only for authorised qualified personnel) (see 6.2.7.)
57
GB
GB