Selve SE Pro-RC Serie Notice De Réglage page 56

GB commeo initial operation/Setting by radio
If multiple receivers have been found, the selected receiver can be changed by
pressing the SELECT button for 1 second. The next receiver will perform a brief con-
firmation run. Only one receiver can be selected at one time for moving, setting and
programming.
SELECT mode
Exit SELECT mode
To exit SELECT mode (the status LED will flash slowly in orange), press the SELECT
button for 3 seconds.
3 s
Status LED indicator on the transmitter for the various operating modes
Transmitter mode
Operating mode
SELECT mode
CONFIGURATION mode (only for
authorised qualified personnel),
see 6.2.7.
Power interruption/
programmed transmitter
Receiver 1
SELECT 1 s
Receiver X
SELECT 1 s
Receiver 3
Indicator on status LED
Lights up when a button is pressed
Flashes slowly in orange
Flashes slowly in green or red
SELECT 3 s
Receiver 2
56
SELECT 1 s
SELECT 1 s