Technical Description - Cola TOPFIRE 70 Manuel D'installation, D'utilisation Et D'entretien

1.4 Technical description

The insert works exclusively on pellets, providing healthy and safe heat in the room. Its automatic control systems
ensure optimum heat output and complete combustion; there are also safety systems to guarantee safe operation
for the unit's parts and for the user.
When correctly installed, the unit works with any outside climatic conditions, and in any case in critical conditions
(strong wind, frost, etc.) the safety systems can intervene, shutting it down.
The inserts model TOPFIRE 70 and model TOPFIRE 80 with nominal power of 10.36 kW guarantee a maximum
heatable volume of 296 m3 considering a coefficient of the building's energy demand equal to 35W/m3. It can vary
depending on the insulation, type and climatic zone.
For technical data, refer to the table on page 10-12.
PULLOUT TRAVEL APPROX. 450MM
Key:
A-Air grilles
B-Power cable connection
C-Combustion air inlet diam. 50mm
D-Flue pipe connection diam. 80mm
E-Pellet hopper
TOPFIRE 70 pellet insert dimensions
44 TOPFIRE 70 – TOPFIRE 80