Reference Standards; Instructions For Requesting Assistance And Replacement Parts; Transport And Installation - Cola TOPFIRE 70 Manuel D'installation, D'utilisation Et D'entretien

1.7 Reference standards

Standard UNI 10683:2012: Installation requirements for heat generators burning wood or other solid biofuels;
Standard UNI EN14785:2006: Requirements for design, manufacture, construction, safety and performance,
Standard CEI EN 60335-1: Safety of electrical appliances for domestic and similar use - part 1;
Standard CEI EN 60335-2-102: Safety of electrical appliances for domestic and similar use - part 2;
Standard CEI EN 55014-1
Standard CEI EN 55014-2: Electromagnetic resistance - Requirements for electrical appliances, electric tools and
Standard CEI EN 61000-3-2: Limits for harmonic current emissions (Input current
Standard CEI EN 61000-3-3: Limitation of voltage fluctuations and flicker in low voltage supply systems for
Standard CEI EN 62233: Measuring methods for electromagnetic fields of electrical household appliances and
Standards DIN plus 51731 - UNI EN 17225-2 - Ö-Norm M 7135: Standards regarding the specifications and
1.8 Data plate
The data plate is located on the inside of the pellet hopper door or on the back of the stove. It gives all the stove's
characteristic data, including the manufacturer's details, serial number, CE marking, test laboratory and the
Declaration of Performance reference number.
1.9 Decommissioning
When the product is no longer to be used, disconnect it from the power supply and empty all pellets from the
hopper. For disposal, the insert must be sealed inside strong packaging; contact the local authority in charge of
such operations in order to proceed according to the current local regulations, or take it to the dealer when
purchasing a similar new unit.
The picture of the bin crossed is labelled on the equipment, and it means that when the device is out of
use it has to be kept separated by other wastes.

1.10 Instructions for requesting assistance and replacement parts

To request any assistance and/or replacement parts contact your dealer, area importer or the nearest authorized
service center, clearly specifying the following: product model, serial number, date of purchase, list of replacement
parts, details of faults or malfunctioning.
- All operations on components must be carried out by authorized and/or qualified personnel.
- Make sure all electrical connections are disconnected and that the insert is cold before carrying out
any work it.
- Only use original replacement parts.

2 TRANSPORT AND INSTALLATION

2.1 Packing, handling, shipment and transport
The insert complete with packing can be lifted using a lift truck, inserting the forks (of suitable length) in the special
spaces in the wooden pallet. Make sure the equipment used for lifting and carrying can take the weight specified on
the data plate and in this manual.
Avoid taking the load in areas where it could be a danger if dropped.
After opening the packaging, remove the insert and very carefully place it on a work surface, avoiding any impact,
then place it the required area, following the instructions given in the next section.
Disposal or recycling of the packing must be carried out by the end-user in compliance with the current local
regulations.
instructions and marking, together with the relevant test methods for approval of
pellet-burning units ;
:
Electromagnetic resistance - Requirements for electrical appliances, electric tools and
similar electric equipment - Part 1: Interference;
similar electric equipment - Part 2: Immunity; Product family standard;
equipment with nominal current
similar with reference to human exposure.
≤
≤
16 A;
classification of pellets.
48
16 A per phase);
TOPFIRE 70 – TOPFIRE 80