Technical Description - Cola Ferroli TERMONOVARA Manuel D'installation, D'utilisation Et D'entretien

1.4 Technical description

The stove works exclusively on pellets and enables easy installation with the heating system. The stove's automatic
control systems guarantee optimum heat output and complete combustion; there are also safety systems to
guarantee safe operation for the stove parts and for the user.
When correctly installed, the unit works in any outside climatic conditions, and in any case in critical conditions
(strong wind, frost, etc.) the safety systems can cut in, shutting down the stove.
The stove model TERMO NOVARA with water weating power of 15,63 kW ensures a maximum heatable volume of
446 m³, considering the coefficient of a building's energy requirements equal to 35 W/m³, and may vary depending
on the insulation, type and climatic zone which are important variables for the correct choice of unit.
For technical data, refer to the table on page 8.
TERMO NOVARA pellet heating stove dimensions
Key:
A - Power cable connection
B - Water drain in overpressure (1/2" female)
C - System return (3/4" male)
D - Water supply connection (3/4" male, max 2 bar)
E - Drain system (1/2" male)
F - Flue pipe connection Ø 80mm
G - Combustion air inlet Ø 50mm
H - System delivery (3/4" male)
I - Pellet hopper door
L - Adjustable feet
M - Control panel
N - Turbulator shaker knobs
TERMO NOVARA stove dimensions
40
TERMO-NOVARA