Technical Description - Cola SPRINT acciaio Série Manuel D'installation, D'utilisation Et D'entretien

1.4 Technical description

The stove works exclusively on pellets, providing healthy and safe heat in the room. The stove's automatic control
systems guarantee optimum heat output and complete combustion; there are also safety systems to guarantee safe
operation for the stove parts and for the user.
When correctly installed, the unit works in any outside climatic conditions, and in any case in critical conditions
(strong wind, frost, etc.) the safety systems can cut in, shutting down the stove.
The stove model SPRINT**ACCIAIO with nominal power of 11,04 kW ensures a maximum heatable volume of 314
m3, considering the coefficient of a building's energy requirements equal to 35W/m3, and may vary depending on
the insulation, type and climatic zone which are important variables for the correct choice of unit.
For technical data, refer to the table on page 8.
SPRINT acciaio pellet stove dimensions
Key:
1 - Air grilles
2 - Power cable connection
3 - Combustion air inlet Ø 50 mm
4 - Flue pipe standard connection Ø 80 mm
4.1-Arrangement for rear fume outlet
5 - Pellet hopper door
6 - Control panel model F047
7 - Ducted air upper outlet connection Ø 80 mm
7.1-Arrangement for Ø 80 mm rear ducting outlet,
high position
7.2- Arrangement for Ø 80 mm rear ducting outlet,
low position
38 SPRINT** acciaio