Kessel Aqualift XL Serie Instructions De Pose Et D'utilisation page 24

Assemblies (fittings made of polymer)
(1) Shut-off valve (optional)
(3) Flap, backwater preventer
(4) Backflow preventer
(5)
(6) Manual diaphragm pump connection DN40
(attached to the side of the Aqualift XL 200)
(7) Level sensor (immersion pipe,
unless configured otherwise)
(8) Vent connection DN70
(9) Inlet connection DN100/150
(10)
(11) Cleaning cover
(12) Pre-scored areas, inlet
(13)
Assemblies (fittings made of grey iron)
(1) Shut-off valve
(2) Y-pipe/pressure pipe connection
(3) Flap, backwater preventer
(4) Backflow preventer
(5)
(6) Manual diaphragm pump connection DN40
(attached to the side of the Aqualift XL 200)
(7) Level sensor (immersion pipe,
unless configured otherwise)
(8) Vent connection DN70
(9) Inlet connection DN100/150
(10)
(11) Cleaning cover
(12) Pre-scored areas, inlet
(13)
2.4 Intended use
The system must be used only for the pumping of normal household faecal wastewater, but not for combustible or explosive
liquids or solvents.
WARNING
Use of the system in a potentially explosive environment (ATEX) is not permitted.
All modifications or attachments that are carried out without the express and written permission of the manufacturer, the use
of non-genuine spare parts and repairs carried out by companies or persons not approved by the manufacturer will lead to a
loss of warranty.
24 / 114
Pump(s)
Type plate
Tank
(optional)
Pump(s)
Type plate
Tank
Lifting station/Installation and operating instructions 010-907