GCE Zen-O'lite RS-00600 Mode D'emploi page 33

13. Re-insert the battery into the device.
14. Connect the device to an AC or DC power source.
DO NOT POWER ON!
15. Press the alarm mute
shows "Leak Test".
a. The device will indicate progress by decimals right of the "Leak test" text.
b. When completed, the device will indicate "Test Passed" or "Test Failed".
i Test Passed - Press battery button
ii Test Failed - Press battery button
16. If the leak test has passed, then clear the device sieve hour counter.
a. Turn on your Zen-O lite portable oxygen concentrator.
b. Simultaneously press the
c. Press the
displayed, where XXXX = number of hours for the old sieve was utilised.
d. Press the alarm mute button
e. Press the battery button
f. The device is now ready to be used.
Important: Contact your home oxygen provider or distributor if the device does not pass
after multiple attempts.
12.3. DISPOSAL
• Contact your distributor regarding disposal of the device.
• Dispose of battery according to local regulations or contact your distributor.
13. WARRANTY
GCE warrants every new Zen-O™ Portable Oxygen Concentrators and associated
accessories ("Products") to be free of defects in material and workmanship, subject to
the following conditions:
All warranties on products, accessories, and components are from the date of sale as
stated on the invoice issued by GCE. Warranties will not be extended based on any war-
ranty work conducted within the warranty period. Out of warranty work will come
with a standard 90-day warranty on parts and labour on the repair done.
and battery
and
or button to navigate he diagnostic menu until "XXXH Sieve" is
until the sieve hour counter shows "0H Sieve".
to exit the diagnostic mode.
33/362
buttons simultaneously until the displays
to exit, continue to step 16.
to exit, then repeat steps 4-15.
buttons until "Diagnostics" is displayed.
EN