Technical Data / Ordering Information - ProMinent DULCOTEST PER 1-mA-50 ppm Mode D'emploi

Temperature range 0 - 50 °C, temperature-compensated, no sudden leaps in
Conductivity 0.05 ... 5.00 mS/cm
Cross-sensitivity bromine, bromamine, chlorine, ozone, peracetic acid,
Interferences Sulphides and thiols deposit on the surface of the gold counter
Life of diaphragm cap Typically 3-6 months, depending on water quality
Materials Diaphragm cap:
Power supply 16 - 24 V DC; min 35 mA at 16 V DC
Output signal 4 - 20 mA
Enclosure rating IP 65
Storage temperature Between 5 and 50 °C
Standard content of delivery • 1 sensor PER 1-mA-50 ppm
Complete set The sensor can only be ordered as a complete set:
Consumable • Set comprising:
ProMinent ®
temperature (sample water),
5 - 50 °C (ambient air)
Pressure Maximum 1 bar (free flow)
Flow Sample water through in-line probe housing DLG III, DGM
optimal: 50 l/h minimum: 20 l/h
maximum: 100 l/h
chlorine dioxide
electrode
Electrode shaft:
15
• 1 sensor PER 1-mA-200 ppm complete
• 1 sensor PER 1-mA-2000 ppm complete
• 1 bottle of electrolyte (50 ml)
• 1 spare diaphragm cap and socket
• 1 pipette (plastic)
• 1 operating instructions manual
• 1 small screwdriver
• PER 1-mA-50 ppm order no. 1030511
• PER 1-mA-200 ppm order no. 1022509
• PER 1-mA-2000 ppm order no. 1022510
2 diaphragm caps
1 bottle of electrolyte (50 ml), order no. 1025881
• 1 diaphragm cap, order no. 1025776
• 1 bottle of electrolyte (50 ml), order no. 1025774

Technical Data / Ordering information

PVDF, PVC
PVC-C
Ordering information
or
or
43