Compliance With Guidelines And Standards - ProMinent DULCOTEST PER 1-mA-50 ppm Mode D'emploi

Ordering information / Compliance with guidelines and standards
Accessories • Measurement and control equipment DULCOMETER
Declaration of conformity The sensors for hydrogen peroxide have been developed and
44
for the measured value H
catalogue)
• In-line probe housing DLG III B, order no. 914956
• Assembly kit for in-line probe housing DLG III,
order no. 815079
• Two-wire signal cable
2
(2 x 0.24 mm , Ø 4 mm), order no. 725122
®
• DULCOMETER simulator, order no. 1004042
• Sampling valve 25 mm, order no. 1004739
• Photometer DULCOTEST
16 Compliance with guidelines and
standards
tested in compliance with current European guidelines and
standards. Production is subject to a high quality standard, which
is ensured by European standards and guidelines.
A corresponding declaration of conformity can be obtained from
ProMinent.
O via identcode (see product
2 2
®
DT 3 order number 1023143
®
D1C
ProMinent ®