Order Information; Technical Data; Guidelines And Standards Complied With - ProMinent DULCOTEST CLE 3-CAN-10 ppm Instructions Complémentaires

Order information / Technical data /

Guidelines and standards complied with

5
Complete kit CLE 3-CAN-10 ppm**
CLE 3.1-CAN-10 ppm**
CTE 1-CAN-10 ppm**
CGE 2-CAN-10 ppm**
BRE 3-CAN-1 ppm**
CDR 1-CAN-10 ppm
CLT 1-CAN-2 ppm
**For diaphragm caps and electrolytes for chlorine sensors see the product
Accessories T-distributor, M12, 5P, CAN
Load resistor M 12 coupling
Load resistor M 12 connector
Connecting cable - CAN, M12, 5P, 0.3 m
Connecting cable - CAN, M12, 5P, 0.5m
Connecting cable - CAN, M12, 5P, 1 m
Connecting cable - CAN, M12, 5P, 2 m
Connecting cable - CAN, M12, 5P, 5 m
Connecting cable - CAN, by the metre
Connecting cable CAN, M12, 5P, screw terminal
Connector CAN, M12, 5P, screw terminal
6
Measuring
ranges Chlorine and chlorine dioxide 0.01...10 mg/l
Resolution 0.01 mg/l
7
CAN standards and specifications complied with
The controller meets the standardised CAN specification for hardware 2.0
(ISO99-1, ISO99-2). This includes the CAN protocol (ISO 11898-1) and details
about the physical application layer in accordance with ISO 11898-2 (high
speed CAN to 1Mbit/sec.) and ISO 11898-3 (low speed CAN to 125kBit/sec.).
The device complies with the CAN-Open specification CIA-DS401, the basis
of the European Standard EN50325-4.
It complies with the controller device profile CiA-404.
14

Order information

catalogue

Technical data

Guidelines and standards complied with
Order no. 1023425
Order no. 1023426
Order no. 1023427
Order no. 1024420
Order no. 1029660
Order no. 1041155
Order no. 1041156
Order no. 1022155
Order no. 1022154
Order no. 1022592
Order no. 1024568
Order no. 1022137
Order no. 1022139
Order no. 1022140
Order no. 1022141
Order no. 1022160
Order no. 1022157
Order no. 1022156
Chlorite 0.01...2 mg/l
Resolution 0.01 mg/l
ProMinent
®