Ordering Information; Guidelines And Standards - ProMinent DULCOTEST CLT 1 Mode D'emploi

Ordering Information / Guidelines and Standards

15 Ordering Information

Standard scopes
of delivery • 1 CLT 1-mA-2 ppm sensor set or CLT 1-mA-0.5 ppm set
• 1 bottle of electrolyte (100 ml) and nozzle
• 1 replacement membrane cap
• 1 operating instructions
• 1 small screwdriver
Complete set The sensors can be ordered only as a complete set:
• CLT 1-mA-2 ppm
• CLT 1-mA-0.5 ppm
Consumable
articles • 1 membrane cap
• 1 bottle of electrolyte (100 ml)
Accessories • DULCOMETER
• Assembly set
• Two-wire signal lead
• Photometer DT 4 for DPD test
• DULCOMETER
• Sampling tap 25 mm

16 Guidelines and Standards

Declaration
of conformity The sensor Chlorite CLT 1 was developed and tested according to the current
European Standards and Regulations. Manufacture is subjected to a high
quality standard, which is assured by European standards and regulations.
A corresponding EC Declaration of Conformity can be obtained from
ProMinent on request.
44
®
D1C Chlorite controller
for DLG III
for DGM
2
(2 x 0.25 mm , Ø 4 mm)
®
Simulator
order no. 1021595
order no. 1021596
order no. 1021824
order no. 1022015
identity code
(see product catalogue)
order no. 815079
order no. 791818
order no. 725122
order no. 1022695
order no. 1004042
order no. 1004739
ProMinent
®