Configuration; Default Ip Address; Web Interface; First Access To The Web - Videotec ULISSE EVO Manuel D'instructions

9 Configuration

9.1 Default IP address

The unit is configured to obtain an IP
address from a DHCP server.
The IP address acquired via DHCP is visible in the
DHCP server log file.
If the DHCP server is not available, the unit
automatically configures itself with a self-generated
IP address in the 169.254.x.x/16 subnet. Configuring
the IP address of the PC as belonging to the same
subnet (example: IP address: 169.254.1.1, subnet
mask: 255.255.0.0).
Use an ONVIF compliant VMS or a network sniffer to
find the IP address of the device (IP scan utility).

9.2 Web interface

Browsers supported (the latest version):
Microsoft Edge, Google Chrome, Mozilla
Firefox.
9.2.1 First access to the web pages
The first operation in configuring the device consists
in connecting to the web interface.
To access the web interface of the product, simply
use a browser to connect to http://ip_address.
On first access, the Home page will be displayed.
For the configuration of the web interface, please
refer to the instruction manual relating to the
installed firmware version, available on the product
web page on www.videotec.com.
24

10 Accessories and Supports

For further details on configuration and
use, refer to the manual of the relevant
accessory or support.

10.1 LED illuminator

The PTZ camera can be equipped with a LED
illuminator.
Fig. 26 UEIxxx.
MNVCEVO_1947_EN