Videotec ULISSE EVO Manuel D'instructions page 32

16 Technical data
CAUTION! TNV-1 installation type. The
installation is type TNV-1, do not connect it
to SELV circuits.
CAUTION! In order to reduce the risk of fire,
only use UL Listed or CSA certified cables
with sections greater than or equal to
0.14mm² (26AWG).
16.1 General
Easy installation thanks to the self-centring connector
Zero backlash
Quick configuration and setup
Dynamic positioning control system
Functions: Preset, Preset Tour (Patrol), Autoflip,
Autopan via Preset Tour
Maximum number of presets: 250
16.2 Mechanical
Constructed from aluminium and tecnopolymer
Epoxy-polyester powder painted, standard colours
grey-white (RAL9002) or black (RAL9005)
Horizontal rotation: 360°, continuous rotation
Vertical rotation: from -90° up to +90° (with ceiling
installation, from -40° up to +90°)
Horizontal speed (variable): from 0.1°/s up to 250°/s
Tilt speed (variable): from 0.1°/s up to 250°/s
Accuracy of preset positions: 0.05°
Cable glands: 2xM16 + 1xM20 + special gasket for
RJ45 cables
Unit weight: 7.1kg (15.6lb) (7.4kg (16.3lb) with LED
illuminator)
30
16.3 Windows for camera
Glass window
• Thick: 6mm (0.24in)
Germanium window
• Thick: 1.5mm (0,06in)
• External treatment: antiscratch (Hard Carbon
Coating - DLC), antireflection
• Internal treatment: antireflection
• Spectral range: from 7.5μm up to 14μm
• Medium transmittance (from 7.5μm up to
11.5μm): 91.2%
• Medium transmittance (from 11.5μm up to 14μm):
80.9%
16.4 Electrical
Supply voltage/Current consumption:
• 24Vac ±20%, 5A, 50/60Hz
• 24Vdc ±10%, 5A
• PoE 90W (only with OHEP90INJ or OHEP90INJO
accessories)
ECO-MODE function for energy saving: 21W, P&T
static
Power consumption:
• 27W, P&T static, heating switched off
• 27W, P&T in motion, heating switched off
• 57W, peak at start-up, heating on and de-icing
function
Power consumption with illuminator on:
• 40W, P&T static, heating switched off
• 40W, P&T in motion, heating switched off
• 70W, peak at start-up, heating on and de-icing
function
Cables input section: from 0.75mm² (18AWG) up to
2.5mm² (13AWG)
Cables signal section: from 0.14mm² (26AWG) up to
1mm² (17AWG)
Alarm inputs: 2 (auto-powered from 12Vdc up to
18Vdc)
Relay outputs: 2 (1A, 30Vac/30Vdc max)
16.5 Network
Ethernet connection: 100 Base-TX
Connector: RJ45
MNVCEVO_1947_EN