Saeco Idea RST CAP020/A Mode D'emploi Et D'entretien page 109

10.2.2 Cleaning the Coffee Dispensing
Spout
10.2.2.1 Manual
Spout Cleaning
The following parts can be removed:
• the upper protection cover of the dispensing spout, by pulling it outwards;
• the lower protection cover of the dispensing spout, by
unscrewing the lower knob;
• the coffee dispensing spout, by pulling it outwards;
• the coffee fitting, by turning it approx. of 90 degrees.
A upper protection cover
B coffee fitting
C-D Coffee dispensing spout
E lower protection cover
10.2.2.2 Automatic Coffee Dispensing
Spout Cleaning
The procedure is explained in chapter "Description of
Messages in the Programming Menu", option "DISPENSER
RINSING".
Coffee Dispensing
10.2.3 Brew group cleaning
10.2.3.1 Manual Cleaning of the Brew
Group
Cleaning must be carried with
no coffee beans in the machine.
Clean the brew group periodically, using the special
tablets.
• Remove the brew group by pulling the appropriate handle
and pressing the button marked by "PRESS".
• Wash with lukewarm water.
Do not use detergents.
• Delicately scrape the upper screen with a plastic spoon.
DS Upper screen
M Handle
N Neutral position
10.2.3.2 Automatic Cleaning of the
Brew Group
The procedure is explained in chapter "Description of
Messages in the Programming Menu", option "GROUP
RINSING".
English
109