Saeco Idea RST CAP020/A Mode D'emploi Et D'entretien page 103

Although all buttons are
previously programmed on
standard values, check if
the dispensed beverage
has the desired features.
If not, brew buttons must
be reprogrammed
chapter "Brew
Programming").
If an anomalous condition
occurs during the brewing
phase, e.g. a fault or a
product shortage,
message indicating
causes of the block will be
displayed.
Special messages
signals are indicated in
chapter "Troubleshooting".
9.6
(Except for COFFEE set-up)
• Immerse the steam wand into the beverage to be heated.
• Turn the steam dispensing knob counter-clockwise. Once
the required temperature is reached, close the knob
(clockwise).
After each use, clean the
steam wand with a damp,
clean cloth/sponge from
(see
any
Buttons
previously
beverage.
Before any brewing cycles, insert the suction tube
(*)
inside the milk container.
(**) Adjust the crema quantity (see section "Crema Adjustment").
a
the
and
Steam
residues
English
of the
heated
103