Saeco Idea RST CAP020/A Mode D'emploi Et D'entretien page 78

English
5.3 Connection to the Water
Network
Before connecting
appliance to the water
network, please read and
follow the
regulations in force in your
country.
Make sure
network provides drinking
water, with
ranging between 0.15 MPA
and 0.8 MPA (1.5 and 8
bars).
Water hardness should not
be lower than 8°F.
The machine should be
supplied
treated with a descaling
device, particularly in case
of water with high content
of calcium and magnesium
salts (hard water).
78
the
applicable
the water
pressure
with water
Before connecting
water filter to the machine,
perform a wash cycle until
the water is clear. Then
connect the water filter to
the machine.
The water network hose
must be certified according
to the IEC 61770 standard.
In case you need to move
the machine to a different
place, the old fitting unit
must be replaced with a
new one (water network
connecting hose).
the