Saeco Idea RST CAP020/A Mode D'emploi Et D'entretien page 98

English
8.2.4 MILK PROGRAMMING
"MILK PROGRAMMING" is a direct control allowing to
program and store the milk quantity for the beverage
chosen.
Select "MILK
PROGRAMMING"
Press and hold the button
corresponding to the
beverage to be
programmed
Release the button
corresponding to the beverage
chosen as soon as the desired
amount of milk is reached
Programming is complete
(1) During milk programming the icon shown in the figure
is displayed.
98
The display shows the
programming icon (1)
The machine starts dispensing
milk only
The machine will stop
dispensing milk.
The next time you dispense the
selected beverage
the programmed quantity of milk
will be dispensed.