Publicité
Les langues disponibles
Les langues disponibles
The Actim 1ngeni instrument is intended to provide safe and reliable operation when used in accordance to
this user manual. If the instrument is used in a manner that is not specified in the user manual, the protections
provided by the equipment may be impaired. The instrument is designed to operate safely under the following
conditions:
ITEM
Number of test bay slots
Multiple assays
Measurement technology
Modes
Illumination type
Colour Touch Screen:
Communications:
Data storage:
Power:
Dimensions:
Weight:
Printer Support:
Operating Environment:
Storage Environment:
• Set up the instrument on a stable, level bench, in an
office or laboratory environment.
• The Actim 1ngeni instrument is not intended as a hand
held instrument; only operate it on a flat surface.
• Install the instrument at least 100mm from an edge.
• Install cables so as to prevent the risk of tripping
or pulling that may cause instrument or personal
damage.
PRODUCT SPECIFICATIONS AND SAFETY
DESCRIPTION
Configured for 1 bay.
Supports multiple Actim test types and protocols.
Advanced image acquisition and analysis.
Timed reading and manual reading
Green LED - 520 nm
Red LED - 622 nm
Blue LED - 470 nm
3,5" diagonal capacitive TFT LCD
Ethernet for data transfer or printing.
USB for data export, barcode reader and printer.
High capacity on-board storage can store up to 999 test results.
History Records allow for search and retrieval.
Archive or export via USB/ Ethernet.
12 V DC from external AC/DC supplied plug pack.
Input: 100 ~ 240V ~ 50/60Hz 0.4A
Battery power (optional).
DC Voltage fluctuation ±10%
DC Current consumption: 0.2A DC typical @ 12V DC
124 mm X 114 mm X 118 mm
Approx. 650 g
Postscript 3 compatible network printers.
USB attached Seiko SLP-620 printer.
Indoor Use (protected from water)
10°C to 30°C.
20% to 70% RH (non-condensing).
0 to 2000m altitude.
Pollution degree: 2
2°C to 45°C,
20% to 70% RH (non-condensing) for at least 7 days.
• The instrument is a non-serviceable part, opening the
instrument will void the instrument warranty.
• Ensure that ferrites are fitted to the USB peripheral
accessories before operation with the instrument.
• Installation Categories (Overvoltage categories) II
• The mains socket for the AC/DC power pack should be
readily accessible.
3
Publicité
