Manual Function - EUROM Alutherm Baseboard 1000 Mode D'emploi

Operation
WARNING
Before every use, make sure that:
•
•
•
•
•
CAUTION
When the device is turned on or off, it may emit a sound. This is material
expanding and shrinking during heating and cool-down.
CAUTION
If the heater is used with Wi-Fi connection, it is not needed to Set day- and
time. When the heater is connected to the Wi-Fi, the day- and time will be set
automatically.
If you use the heater without Wi-Fi connection, please be aware that day and
time settings will be lost if the device is switched off using the ON/OFF switch
or is unplugged.
1. Set the ON/OFF switch to the ON position
(Figure 14, pos. 1).
2. The display (Figure 14, pos. 2) will show OFF.
3. Press the ON/OFF button.
4. Press and hold the SET button until SET
appears on the screen.
5. Use the plus and minus button to select the
correct day and confirm with the SET button.
6. Use the plus and minus button to set the
correct time:
•
Hours, confirm with the SET button;
•
Minutes, confirm with the SET button.
7. Press the MOD button to choose the desired
function: manual or program. The display will
show an M for manual or P for program.

Manual function

1. Set the capacity at which the heater will work using the plus and minus button. The 3
suns indicate whether the heater is set to low, medium or high capacity.
you operate the device with dry hands;
the device is clean and dry;
the device is not damaged;
the device is not covered or blocked;
the device is securely installed.
Figure 14
31