Control Panel - EUROM Alutherm Baseboard 1000 Mode D'emploi

Control panel

1. ON/OFF button
2. LED display
3. SET button
4. WEEK button
5. Minus button
6. Remote control receiver
7. Plus button
8. MOD button
LED display
The LED display will go dark if no adjustments are
made for 2 minutes. The LED display will light up
again when you press a button.
Status indication (Figure 4, pos. 1):
•
The 3 suns indicate whether the heater is set
to low, medium or high capacity.
•
The Wi-Fi symbol indicates if there is a Wi-Fi
connection.
•
The "P" indicates that the program function is
active.
•
The "M" indicates that the manual function is
active.
Temperature indication (Figure 4, pos. 2):
•
SET indicates that the day or time can be set, or that the SET temperature is shown on
display.
•
ON indicates that the heater is switched on.
•
OFF indicates that the heater has been switched off with the stand-by button.
•
Temperature shown in degree Celsius.
Time indication (Figure 4, pos. 3):
•
Time shown in 24-hours format.
Day indication (Figure 4, pos. 4):
•
Number corresponds with the day of the week: 1 = Monday, 2 = Tuesday, and so on.
24
Figure 3
Figure 4