EUROM Alutherm Baseboard 1000 Mode D'emploi page 29

Figure 10
7. Place the bracket holes (Figure 10, pos. 3) over the wall brackets (Figure 10, pos. 1).
8. Let the device (Figure 10, pos. 2) drop into the openings of the wall brackets (Figure 10,
pos. 1).
Temperature sensor (Optional)
CAUTION
For accurate temperature measuring use the external temperature sensor.
1. Make sure the ON/OFF switch is in the OFF
position (Figure 11, pos. 2)
2. Connect the temperature sensor connector
(Figure 11, pos. 23) to the sensor plug (Figure
11, pos. 1).
3. Place the temperature sensor approximately
2 meters away from the device.
Figure 11
29