EUROM Alutherm Baseboard 1000 Mode D'emploi page 33

View weekly timer setting
1. Press repeatedly on WEEK. You will see the following timer settings, one after the other:
•
one-off or repeated;
•
anticipation on or off;
•
temperature setting;
•
timer on-time;
•
timer off-time;
•
next timer setting.
Turning off weekly timer setting
1. Press and hold the WEEK button until 01 appears flashing on the screen.
2. When 01 is flashing, press and hold the MOD button until the word TIME disappears
from the display to indicate that the data will be retained but will not be active.
3. To turn weekly timer on again, press and hold the WEEK button until 01 appears flashing
on the display.
4. When 01 is flashing, press and hold the MOD button until the word TIME appears on the
display.
Deleting weekly timer setting
1. Press and hold the WEEK button until 01 appears flashing on the screen.
2. If you wish to delete all timer settings, press the WEEK button and hold until 01 appears
flashing on the display. Then release the WEEK button and during 01 is flashing, press
and hold the MOD and SET buttons at the same time, until you hear a beep. The screen
will show 88:88, indicating that all settings have been deleted.
Deleting a specific timer setting
1. Press and hold WEEK.
2. Press SET and go past 01- ][ and on/off.
3. Search for the timer setting that you need.
4. When the number of the timer setting that you wish to change appears, press and hold
SET. You will hear a short beep and the selected setting has been deleted.
ECO mode
The remote control has an ECO button for an energy-efficient mode; the device maintains the
room temperature at 16°C.
1. Press the ECO button to activate; EC appears on the screen.
2. Press the ECO button to deactivate.
If the heater is working in ECO mode and a timer setting becomes active, the device will start
to work according to the timer setting. When the timer setting ends and the device goes off,
the device will not return to the ECO mode.
Open window mode
1. Press the Open window button to activate. The Open window indicator appears on the
display.
1. When the ambient temperature decreases 8°C or more within 15 minutes, the device
stops heating and the Open window indicator starts flashing on the display.
2. Press the Open window button to deactivate.
33