Introduction; Specifications - Stryker Medical 6082 Rugged MX-PRO R3 Manuel D'utilisation

INTRODUCTION

This manual is designed to assist you with the operation and maintenance of the 6082
PRO Ambulance Cot. Read it thoroughly before using the equipment or beginning any maintenance on it.

SPECIFICATIONS

Overall Length/Minimum Length/Width
!
Height − Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7
Backrest Articulation/Shock Position
@
Weight
Maximum Weight Capacity
Caster Diameter/Width
Minimum Operators Required for Loading/Unloading
an Occupied Cot
Recommended Fastener Systems
Recommended Floor Height#
Roll−In Style
Single Wheel Lock / Double Wheel Lock
! Height measured from bottom of mattress at seat section to ground level.
@ Cot is weighed without mattress and restraints.
# Cot may be loaded from any height and a height limiting kit (p/n 6060−202) is available to limit the load height of the cot.
Stryker reserves the right to change specifications without notice.
The MX−PRO is designed to conform to the Federal Specification for the Star−of−Life Ambulance KKK−A−1822−D.
Introduction
80.5"/61.75"/23"
13.5"
21.0"
25.5"
29.0"
32.0"
35.0"
37.5
2_ to 73° / +14_
81 pounds
650 pounds
6"/2"
2
Model 6370/6374/6377/6378 Floor Mount Type
Model 6371/6375 Wall Mount Type
Up to 32"
Yes
Optional
Figure 1 − Lowest Height Position
1−2
MX−