Stryker Medical 6082 Rugged MX-PRO R3 Manuel D'utilisation page 17

Pedi−Matet Infant Restraint System Attachment Instructions
5. Pull firmly on the end of the adjustable backrest strap and tighten it securely.
6. Thread the mainframe straps down between the cot frame and the mattress. To be sure the release but-
ton is toward the foot end of the cot, insert the buckle behind the crossbrace and bring the it up in front
of the crossbrace. Secure the buckle around the litter crossbrace leaving a little slack in the strap for final
adjustment (see Figure 14).
Figure 14 − Securing the Safety Restraints on a RuggedtCot
WARNING
To avoid accidental release of the Pedi−Matet, and possible injury to the infant, ensure the buckle is located
away from obstructions on the cot.
7. Verify all the straps are snug and fastened securely (see Figure 15).
These are general instructions for installation of the Pedi−Matet. Safe and proper use of the Pedi−Matet is solely at
the discretion of the user. Stryker recommends all users be trained on the proper use of the Pedi−Matet before using it
in an actual situation.
Retain these instructions for future reference. Include them with the product in the event of transfer to new users.
Pedi−Matet is a trademark of Ferno−Washington Inc.
Figure 15− Pedi−Matet Strapped to a Ruggedt Cot
1−15