Stryker Medical 6082 Rugged MX-PRO R3 Manuel D'utilisation page 16

Pedi−Matet Infant Restraint System Attachment Instructions
Refer to the Pedi−Matet users manual for the manufacturer's recommendations for the use, operation and
care of the Pedi−Matet Infant Restraint System.
Securing the Pedi−Matet to the cot
1. Remove any restraints already attached to the cot.
2. Raise the cot backrest to the full upright position.
3. Position the Pedi−Matet pad flat on the backrest with the black backrest straps out (see Figure 12).
Figure 12 − Positioning the Pedi−Matet
4. Wrap the straps around the backrest and insert the ends of the straps through the brackets. Securely
fasten the buckle (see Figure 13).
Figure 13 − Fastening the Pedi−Matet Buckle
WARNING
To avoid accidental release of the Pedi−Matet, and possible injury to the infant, ensure the buckle is located
away from obstructions on the cot or head end storage pouch.
1−14