Switching The Device On / Off; Cleaning The Filter; After Vacuuming; Care And Maintenance - Hilti VC 5-A22 Mode D'emploi

4. Remove the filter bag and remove the holder for the filter bag.
5. Push the holder for the filter bag on to a new filter bag.
6. Secure the holder with the filter bag to the ribs of the waste material container.
7. Set the suction head on the waste material container and close the two catches.
5.1.5 Connecting/disconnecting the suction hose
1. Connect the suction hose to the suction hose intake socket.
▶ The suction hose should be heard to engage.
2. To disconnect the suction hose, press and hold down the EJECT button.
3. Disconnect the suction hose from the suction hose intake socket.
5.2 Types of work
WARNING
Risk of injury !
▶ Use of this product to pick up hazardous dusts is not permissible.
▶ Use this product only for dry applications.
5.2.1

Switching the device on / off

1. To switch on the device, turn the control switch to this position: MAX.
To operate the device for a longer period at reduced suction power, set the control switch to this
position: ECO.
2. To switch off the device, set the control switch to this position: OFF.
5.2.2

Cleaning the filter

1. Switch the appliance on.
2. Hold your hand over the end of the hose.
3. Wait until maximum vacuum pressure is reached.
4. Press the CLEAN button 4-5 times.
5. Switch the appliance off.
5.2.3

After vacuuming

1. Turn the control switch to this position: OFF.
2. Empty the container and clean the appliance by wiping it with a damp cloth.
3. Snap the hose into the hose holder.
4. Stow the nozzles away.
5. Store the vacuum cleaner in a secure, dry place where it is inaccessible to unauthorized users.
▶ CAUTION This vacuum cleaner may be stored only indoors.
6

Care and maintenance

WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance tasks!
Care and maintenance of the tool
• Carefully remove stubborn dirt.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these can attack the plastic parts.
Care of the Li­ion batteries
• Keep the battery free from oil and grease.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these may attack the plastic parts.
• Avoid ingress of moisture.
*2190975*
2190975 English 15