Control Switch - Hilti VC 5-A22 Mode D'emploi

3.2 Product overview
3.3

Control switch

Status
ECO
MAX
OFF
3.4 Items supplied
Dry vacuum cleaner complete with filter element, suction hose with connectors, hand nozzle, crevice nozzle,
shoulder strap and operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group | USA: www.hilti.com
3.5 Li-ion battery state of charge display
The state of charge of the Li-ion battery and malfunctions of the appliance are indicated by the display on
the Li­ion battery. The state of charge of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks, the appliance is ready for use.
1 LED blinks, the appliance is not ready for use.
4 LEDs blink, the appliance is not ready for use.
Battery state of charge cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.
If the battery charge state LEDs blink, please refer to the information given in the Troubleshooting
section.
*2190975*
1
2190975
EJECT button for hose
@
Grip
;
Control switch
=
Holder for shoulder strap
%
Hand nozzle
&
Hose
(
Crevice nozzle
)
Catch
+
Waste material container
§
Suction head
/
CLEAN button for filter cleaning
:
Battery compartment
∙
Discharged-air filter
$
Meaning
Energy-saving mode
Switching on
Switching off
Meaning
State of charge: 75 % to 100 %
State of charge: 50 % to 75 %
State of charge: 25 % to 50 %
State of charge: 10 % to 25 %
State of charge: < 10 %
The battery has overheated.
The appliance has overheated or is overloaded.
English 13