Bodet Opalys Date Instructions De Mise En Service Et D'utilisation page 37

points) :
1) Go to mode_prg and press [SEL] : the number of the month flashes.
Press [+] to select the month.
2) Press [SEL] : "Order" flashes. Order denotes the sequence number
for the day of the week
always denotes the last week).
The value "F" gives the choice of a fixed date.
3) Having determined the Order, press [SEL] : the "number of the day"
flashes.
– Choice of a day of the week (Order from 1 to 7) : press [+] and
select one of the values between 1 (Monday) and 7 (Sunday).
– Choice of a fixed date (Order = F) : press [+] and select a value
between 1 and the last day of the chosen month
4) Press [SEL] : the number of the month flashes.
Give the start of the winter period. Press [+] to select the month. Then
continue as described in points 2 and 3 to set the start of the summer
period.
7. Countdown "Event" in days.
Select the value "EV" using the [+] button and validate with [SEL] (see
page 33).
a) Select the date of the event to be counted down to :
Begin with the year with [+] from 00 (2000) to 99 (2099) and validate
with [SEL].
Then proceed in the same way for the month and the day.
b) Determine with [+] the display mode :
FIX for a fixed display,
ALT to programme an alternating display of number of days and date,
6 Example of Order calculation : the second Monday of the month and
the second Thursday of the month will each have an Order of "2". While
the last Tuesday in June has an Order of "5" since there are no more than
5 weeks in a month.
7 The last day is either 28, 30 or 31 depending on the month (28 is
imposed for the month of February whatever the year).
(from 1 to 5 according to the months) (order
6
.
7
37