Load On The Pallet - probst VTK-V Manuel D'utilisation

Operation
5.2

Load on the pallet

1. Use the support roll to place the
VTK-V on the pallet. Move the VTK-V
carefully to the load.
4. Tilt the VTK-V towards yourself and
pull it so the support roll is on the edge
of the pallet. The wheels have to
extend over the edge of the pallet.
7. The VTK-V can now be moved away.
51100015
2. Bring the stop and the bottom plate
in position by placing the VTK-V in the
upright position.
5. Tilt the VTK-V further on until it
stands on its wheels.
15 / 18
3. Engage the lever up to the stop
clockwise, so the load is getting
clamped.
6. At place of destination, bring the
VTK-V carefully in the upright position.
Rotate the lever counterclockwise to
release the load.
GB