Trouble Shooting; Repairs - probst VTK-V Manuel D'utilisation

Maintenance and care
6.2

Trouble shooting

ERROR
The clamping force is insufficient, the
load is slipping out
(optional)
(optional)
Adjustment of the gripping range
(optional)
Property of material
6.3

Repairs

Only persons with the appropriate knowledge and ability are allowed to repair the device.
Before the device is used again, it has to be checked by an expert.
51100015
CAUSE
The grippers are worn
The maximum load is exceeded
The actual opening width is not correct
The surface of the material is dirty or
the material is not suitable / allowed for
this device
17 / 18
REPAIR
Replace the grippers
Reduce the weight of the load
Adjust the gripping range according to
the load you want to transport
Check the surface of the material or ask
the manufacturer, if the material is
allowed for this device
GB