Operation / Load Handling; Vacuum Operation - probst AIRLIFT ALX-120 Instructions D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 40

Operation / load handling

5
Operation / load handling
5.1

Vacuum operation

Inspect the vacuum unit and accessories for signs of damage before each use.
Connect the extension cable to the mains cable of the vacuum generator using the supplied strain relief, which is
attached to the vacuum generator (backpack suction cup). (Fig. 1/ Fig. 2)
Put on the vacuum generator (backpack suction cup) and adjust the backpack harness.
Attach the suction hose to the carrying handle and tighten the hose clamp supplied.
(see fig. 3 / fig. 4).
Connect the extension cable to an FI socket (with FI circuit breaker).
To switch on the vacuum generator, move the mains switch to the "I" position (Fig. 5 / Fig. 6).
To switch off the vacuum generator, move the mains switch to the "0" position (Fig. 5 / Fig. 6).
Fig. 1
Fig. 2
52600018
Fig. 3
Fig. 4
13 / 17
Fig. 5
Fig. 6
GB

Publicité

Table des Matières
loading

Table des Matières