Operation
4.2
Device operation
4.2.1
Connecting a carrying strap to the device
•
The four metal eyelets around the handle are
used to attach the lifting carrying strap.
•
Secure one of the buckles (at each end of the
strap) in an eyelet provided for this purpose.
4.2.2
Replacing the rubber foam seal
•
Remove the damaged or used rubber foam seal
by pulling it out.
•
Carefully press the new rubber foam seal into
position.
4.2.3
Change filter
•
Use the tip of a screwdriver to remove the
plastic plug (ring) and filter on the bottom of
the device.
•
Insert a new filter (or cleaned filter) and push
the plastic plug (ring) back in to secure the
filter.
58500009 / 58500010 / 58500011
11 / 16
GB