Controls And Instruments - GOLDONI 30HST TS24 Emploi Et Entretien

2. CONTROLS AND INSTRUMENTS

See fig.1.
1 Dashboard.
2 Ignition switch
3 Light switch
4 Indicator lever
5 Hazard light switch (hazard light)
6 Gear select panel, creep range and front drive
7 Forward drive pedal
8 Reverse drive pedal
9 Forward gear select lever
10 Force gear reset pedal
11 Engine throttle lever
12 Main brake pedal
13 Parking brake lever
14 Front PTO (optional) control knob
15 Rear and central PTO control clutch knob
16 Speed selection lever: 540-1000 Rpm, independent rear PTO
17 Central PTO engage lever
18 Synchronised PTO engage lever
19 Rear differential lock engage button
20 Gear lever neutral (to move the tractor with the engine off)
21 "Gearbox neutral" lever release pin
22 Rear hydraulic lift control lever
23 Rear hydraulic lift enable button (only in the Raise-Lower version)
24 Controlled draft regulating knob (optional)
25 Controlled position regulating knob (optional)
26 Lift working rate regulating with lift lock potential
27 Auxiliary spooling valve control lever
28 Rear auxiliary spooling valve control lever
29 Seat firmness regulating knob
30 Seat distance regulating knob
31 Seat firmness regulating lever (only for EEC approved seat)
32 Seat height adjusting lever (only with EEC approved seat)
33 Oil change plug and dipstick for mechanical transmission
34 Front lift control lever (or front auxiliary spooling valve - optional)
35 Front auxiliary spooling valve control lever
36 Dashboard display readout select button
See fig.2
1 Yellow indicator light engine glow plugs
2 Red alternator warning light (out when engine running)
3 Red warning light engine air filter clog
4 Red oil pressure warning light (off when engine running)
74