Controls And Instruments; Model Identification - GOLDONI BASE Série Manuel D'emploi Et Entretien

2. CONTROLS AND INSTRUMENTS

See fig.1.
1 Dashboard.
2 PTO control lever 540 - 540E.
3 Main brake pedal.
4 Oil drain plug front gearbox casing.
5 Oil drain plug rear differential casing.
6 Parking and emergency brake lever (to disengage the brake, depress the
pedal and push in the button).
7 Rear differential locking rod.
8 Lift lever.
9 Tool box.
10 Seat horizontal adjustment screws (where applicable)
11 Swivel grease nipples; steering ball joint coupling.
12 7-pin power point.
13 Rear differential and lift oil filler plug.
14 Independent and synchronised PTO lever.
15 Lift arm grease nipples.
16 1st, 2nd, 3rd, 4th gear shift lever.
17 Creep range - reverse gear lever R-V-RM (Creep-Fast-Reverse).
18 Throttle lever.
19 Clutch pedal.
20 Engine stop knob.
21 Front differential lock rod.
22 Gearbox oil filler plug.
23 Seat distance regulating lever. (where applicable)
24 Seat height regulating knob. (where applicable)
25 Seat comfort adjusting lever. (where applicable)
See fig.2
1 Turn signal and emergency flashing light switch.
2 Engine stop knob.
3 Machine Serial plate.
4 Light switch and horn button.
5 Ignition switch.
6 Fuse box.
7 Green turn signal indicator light.
8 Blue high beam indicator light.
9 Fuel low warning light (lights when about 5.5 litres remain).
10 Red battery charge warning light (off when engine has started).
11 Red low engine oil pressure warning light (off when engine has started).
12 Hazard light switch (where applicable)

3. MODEL IDENTIFICATION

Model, series and chassis number are the tractor identification data. They are
found on a special metal plate n.3 fig.2.
52