Making Your First Recording; Réalisation De Votre Premier Enregistrement - Samsung SC-D6550 Manuel D'instructions

Caméscope vidéo numérique
Table des Matières

Publicité

ENGLISH
The Camcorder : Basic Recording

Making your First Recording

1. Connect a power source to
the Camcorder. (see page 22)
(A Battery pack or a AC
Power adapter) Insert a
cassette. (see page 38)
2. Remove the Lens cover.
3. Set the Power switch to REC.
I
Open the LCD screen.
Make sure that STBY is
displayed.
I
If the write protection tab
of the cassette is open
(set to save),
STOP and Protection ! will be displayed.
Release the write protection tab to record.
I
Make sure the image you want to record appears on the LCD
screen or Viewfinder.
I
Make sure the battery level indicates that there is enough
remaining power for your expected recording time.
4. To start recording, press the Start/Stop button.
REC G is displayed on the LCD screen.
I
To stop recording, press the Start/Stop button again.
I
STBY is displayed on the LCD screen.
[ Note ]
Detach the Battery pack when you are finished recording to prevent
unnecessary battery power consumption.
1
4
Votre caméscope : enregistrement simple
Réalisation de votre premier enregistrement
2
3
s'affichent. Refermez le volet de protection en écriture pour
pouvoir enregistrer.
I
Assurez-vous que la scène que vous souhaitez enregistrer
apparaît sur l'écran ACL ou dans le viseur.
I
Assurez-vous que le niveau de la batterie indique une charge
suffisante pour la durée souhaitée de votre enregistrement.
4. Pour commencer l'enregistrement, appuyez sur le bouton
Start/Stop.
L'indication REC G s'affiche sur l'écran ACL.
I
Pour arrêter l'enregistrement, appuyez à nouveau sur le bouton
Start/Stop.
I
L'indication STBY (VEILLE) s'affiche sur l'écran ACL.
[ Remarque ]
Retirez la batterie à la fin de l'enregistrement afin d'éviter toute
consommation inutile d'énergie par le caméscope.
FRANÇAIS
1. Raccordez votre caméscope à
une source d'alimentation
(voir page 22). (Batterie ou
adaptateur c.a.) Insérez une
cassette (voir page 38).
2. Retirez le cache-objectif.
3. Placez l'interrupteur de mise
sous tension sur REC.
I
Ouvrez l'écran ACL.
Assurez-vous que le
témoin STBY (VEILLE)
apparaît à l'écran.
I
Si la languette de
protection de la cassette
est ouverte, les indications
STOP (ARRÊT) et
Protection ! (Protection !)
41
41

Publicité

Table des Matières
loading

Table des Matières