Cooking Time; End Of Operation; Preset Operation; Setting The Clock - CONSTRUCTA CF335650 Mode D'emploi

Cooking time

Automatic switch-off after a cooking time setting has elapsed.
Set the operating mode and temperature.
1.
The appliance heats up.
Press the clock function button until the KJ and x symbols
2.
light up.
Set the cooking time with the rotary selector
3.
(e.g. ‚:„‹ hours).
The setting is applied automatically. Then the clock is
displayed again and the set cooking time starts counting
down.
Once the cooking time has elapsed, the appliance switches off
automatically.
Turn the operating mode selector back to the Û position.
1.
Press the clock function button to exit the clock function.
2.

End of operation

Automatic switch-off at a set time.
Set the operating mode and temperature.
1.
The appliance heats up.
Press the clock function button until the KJ and y symbols
2.
light up.
Set the end of operation using the rotary selector
3.
(e.g. ‚ƒ:„‹ o'clock).
The setting is applied automatically. The clock is then
displayed again.
The appliance switches off automatically at the time set for the
end of operation.
Turn the operating mode selector back to the Û position.
1.
Press the clock function button to exit the clock function.
2.
62

Preset operation

The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
To set this function, combine the cooking time and end of
operation clock functions.
Bear in mind that food which spoils easily should not be left in
the cooking compartment for too long.
Set the operating mode and temperature.
1.
The appliance heats up.
Press the clock function button until the KJ and x symbols
2.
light up.
Set the cooking time with the rotary selector
3.
(e.g. ‚:„‹ hours).
The setting is applied automatically.
Press the clock function button until the KJ and y symbols
4.
light up.
Set the end of operation using the rotary selector
5.
(e.g. ‚ƒ:„‹ o'clock).
The appliance switches off and waits until the appropriate
time to switch on (‚‚:‹‹ in the example). The appliance
switches off automatically at the time set for the end of
operation (‚ƒ:„‹ ).
Turn the operating mode selector back to the Û position.
6.
Press the clock function button to end the preselection mode.
7.

Setting the clock

You can only change the clock when no other clock function is
active.
Press the clock function button until the KJ and 3 symbols
1.
light up.
Set the clock using the rotary selector.
2.
The setting is applied automatically.

Rapid heat up

You can reduce the heating up time for the 3 Hot air and ë
Bread-baking operating modes if the set temperature is higher
than 100 °C.
Note: During Rapid heat up, do not place any food in the
cooking compartment for as long as the f symbol is lit.
Set the operating mode and temperature.
1.
The appliance heats up.
Press the clock function button until the KJ and f symbols
2.
light up and Πappears in the clock display.
Turn the rotary selector clockwise.
3.
Ž is displayed in the clock display and the f symbol lights
up. Rapid heat up is activated.