Automatic Safety Cut-Out; Electronic Clock; Clock Display; Minute Minder - CONSTRUCTA CF335650 Mode D'emploi

Basic settings menu
Submenu Basic setting
Audible signal Audible signal off
Audible signal 30 seconds
Audible signal 2 minutes
Audible signal 10 minutes

Electronic clock

In this section, you can read about
how to set the timer
■
how to switch off your appliance automatically
■
how to switch your appliance on and off automatically
■
(preset operation)
how to set the time
■
find out how to activate rapid heat up
■
Clock function

Minute minder

Q
Cooking time
x
End of operation
y
Preset operation
Clock
3
Rapid heat up
f
Notes
When you set a clock function, the time interval increases
■
when you set higher values (e.g. cooking time up to‚:‹‹œ to
the minute, using ‚:‹‹œ to the nearest 5 minutes).
Between ƒƒ:‹‹ and †:†Š the clock display is darkened if
■
you do not alter any settings during this time or if no clock
function is activated.
For the Q minute minder, x cooking time, y end of
■
operation and preselection mode clock functions, a signal
sounds when the settings have elapsed and the Q or y
symbol flashes. To cancel the audible signal early, press the
clock function button.
Switching the clock display on and off
Press and hold the clock function button for 6 seconds.
1.
The clock display switches off. If a clock function is active,
the associated symbol remains lit.
Press the clock function button briefly.
2.
The clock display switches on.
Setting
symbol
™‚‹
™„‚
™„ƒ
™„„
Use
You can use the minute minder as an egg timer or a kitchen timer. The appliance does
not switch on or off automatically
The appliance switches off automatically after a cooking time setting has elapsed
(e.g. ‚:„‹ hours)
The appliance switches off automatically at a set time (e.g. ‚ƒ:„‹ o'clock)
The appliance switches on and off automatically. Cooking time and end of operation
have been combined.
For setting the clock
For shortening the heat up time

Automatic safety cut-out

The automatic safety cut-out is only activated if you have not
made any settings on your appliance for a prolonged period.
You can adjust the period of time after which your appliance
shuts off.
"Safety cut-out" appears in the text display and ‹‹‹ flashes in
the temperature display. Appliance operation is interrupted.
Turn the operating mode selector to the Û position to deactivate
it.

Clock display

Clock function button
Minute minder
Press the clock function button repeatedly until the KJ
1.
and Q symbols light up.
Set the duration using the rotary selector (e.g. †:‹‹ minutes).
2.
The setting is applied automatically. Then the time is
displayed again and the timer starts counting down.
Rotary selector
61