End Of Operation; Cooking Time; Preset Operation - CONSTRUCTA CF2347.1 Notice D'utilisation

Clock function

Preset operation

3
Clock
f
Rapid heat up
Notes
Between the times ƒƒ:‹‹ and †:†Š the clock display is
■
dimmed if you do not make any settings in that period or no
clock function is activated.
When you set a clock function, the time interval increases
■
when you set higher values (e.g. cooking time up to‚:‹‹œ to
the minute, using ‚:‹‹œ
to the nearest 5 minutes).
For the Q minute minder, x cooking time, y end of
■
operation and preselection mode clock functions, a signal
sounds when the settings have elapsed and the Q or y
symbol flashes. To cancel the audible signal before it ends,
press the KJ clock function button.
Briefly press the KJ clock function button to select a clock
■
function. You then have 3 seconds to set the selected clock
function. After this time, the setting mode is exited
automatically.
Switching the clock display on and off
Press and hold the KJclock function button for 6 seconds.
1.
The clock display switches off. If a clock function is active,
the associated symbol remains lit.
Press the KJclock function button briefly.
2.
The clock display switches on.
Timer
Press the KJclock function button repeatedly until the KJ
1.
and Q symbols light up.
Set the duration using the rotary selector (e.g. †:‹‹ minutes).
2.
The setting is applied automatically. Then the clock is
displayed again and the minute minder starts counting down.

Cooking time

Automatic switch-off after a cooking time setting has elapsed.
Set the operating mode and temperature.
1.
The appliance heats up.
Press the KJclock function button repeatedly until
2.
the KJand x symbols light up.
Set the cooking time with the rotary selector
3. (e.g. ‚:„‹ hours).
The setting is applied automatically. The time is then
displayed again and the set cooking time counts down.
Use
The appliance switches on and off automatically. Cooking time and end of operation
have been combined.
Setting the clock
Shortens the heat up time
Once the cooking time has elapsed, the appliance switches off
automatically.
Turn the operating mode and temperature selector back to
1.
the Û position.
Press the KJ clock function button to exit the clock function.
2.

End of operation

Automatic switch-off at a set time.
Set the operating mode and temperature.
1.
The appliance heats up.
Press the KJclock function button repeatedly until the KJ
2.
and y symbols light up.
Set the end of operation using the rotary selector
3. (e.g. ‚ƒ:„‹ o'clock).
The setting is applied automatically. The clock is then
displayed again.
The appliance switches off automatically at the time set for the
end of operation.
Turn the operating mode and temperature selector back to
1. the Û position.
Press the KJ clock function button to exit the clock function.
2.
Preset operation
The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
To set this function, combine the cooking time and end of
operation clock functions.
Bear in mind that food which spoils easily should not be left in
the cooking compartment for too long.
Set the operating mode and temperature.
1.
The appliance heats up.
Press the KJclock function button repeatedly until
2.
the KJand x symbols light up.
83