Operating The Appliance; Switching Off The Appliance; Changing The Basic Settings - CONSTRUCTA CF335650 Mode D'emploi

Operating the appliance

In this section, you will find out how to use your appliance,
change the basic settings, and when your appliance switches
off automatically.
Switching on the appliance
Turn the operating mode selector until the desired operating
1.
mode appears on the text display.
A default temperature appears on the temperature display.
Turn the temperature selector to change the default
2.
temperature.
Your appliance begins heating.
Hot air
Notes
The steam cooking é and Hydro clean > operating modes
■
can only be started if neither • nor œ are displayed in the
temperature display.
If no default temperature is displayed, the temperature for
■
your selected operating mode is a fixed setting. You cannot
change this temperature.
Operating mode
3 Hot air
A Defrost
% Top/bottom heat
0 Circotherm intensive
ë Bread-baking
$ Bottom heat
4 All-round grilling
+ Full-surface grill
( Centre-area grill
é Steam cooking
> Hydro clean
\ Light
Current temperature
Press the info button. The current temperature appears for 3
seconds.
Note: The current temperature can only be displayed with
operating modes with a default temperature.
60
Default Temperature
temperature in range in °C
°C
160 40 - 200
Fixed setting -
170 50 - 275
220 50 - 275
200 180 - 220
200 50 - 225
170 50 - 250
220 50 - 275
180 50 - 275
Fixed setting -
Fixed setting -
Fixed setting -
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
Temperature reached (figure A)
■
Appliance reheating (figure B)
■
A

Switching off the appliance

Turn the operating mode selector to the Û position. The
appliance is switched off.
The appliance has a cooling fan. After the appliance is switched
off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Temperature Text display
display
Residual heat
•
high
Residual heat
œ
low

Changing the basic settings

Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off.
Press and hold the info button for 3 seconds to reach the
1.
basic settings menu.
The text display shows "Select language: German".If the
appliance controls are locked, you must unlock them first.
Press the info button briefly and repeatedly until the current
2.
basic setting for the relevant submenu is displayed on the
text display (e.g. "Audible signal off").
Using the temperature selector, set the required basic setting
3.
within a submenu (e.g. "Audible signal 2 minutes").
Press and hold the info button for 3 seconds.
4.
Your basic setting is saved.
You can change the following basic settings:
Basic settings menu
Submenu Basic setting
Language Select language
English
Childproof lock Appliance controls
unlocked
Appliance controls locked
Appliance permanently
locked
B
Meaning
Residual heat high
(above 120 °C)
Residual heat low
(between 60 °C and 120 °C)
Setting
symbol
™‚‹
™‚‚
™ƒ‚