Operating The Appliance; Electronic Clock; Clock Display - CONSTRUCTA CF232450 Mode D'emploi

Operating the appliance

In this section, you will find out how to switch your appliance on
and off, and how to select an operating mode and temperature.
Switching on the appliance
Turn the operating mode selector until the desired operating
1.
mode is selected.
Turn the temperature selector until the desired temperature is
2.
selected.

Electronic clock

In this section, you can read about
how to set the timer
■
how to switch off your appliance automatically
■
how to switch your appliance on and off automatically
■
(preset operation)
how to set the time
■
Clock function
Minute minder
Q
Cooking time
x
End of operation
y
Preset operation
Clock
3
Notes
When you set a clock function, the time interval increases
■
when you set higher values (e.g. cooking time up to‚:‹‹œ to
the minute, using ‚:‹‹œ
to the nearest 5 minutes).
For the Q minute minder, x cooking time, y end of
■
operation and preselection mode clock functions, a signal
sounds when the settings have elapsed and the Q or y
symbol flashes. To cancel the audible signal before it ends,
press the KJ clock function button.
Briefly press the KJ clock function button to select a clock
■
function. You then have 3 seconds to set the selected clock
function. After this time, the setting mode is exited
automatically.
Switching the clock display on and off
Press and hold the KJclock function button for 6 seconds.
1.
The clock display switches off. If a clock function is active,
the associated symbol remains lit.
Press the KJclock function button briefly.
2.
The clock display switches on.
Use
You can use the minute minder as an egg timer or a kitchen timer. The appliance does
not switch on or off automatically
The appliances switches off automatically after a cooking time setting has elapsed
(e.g. ‚:„‹ hours)
The appliance switches off automatically at a set time (e.g. ‚ƒ:„‹ o'clock)
The appliance switches on and off automatically. Cooking time and end of operation
have been combined.
Setting the clock
The r indicator lamp lights up while the appliance is heating
up and during any subsequent heating.
Switching off the appliance
Turn the operating mode selector back to the Û position.
1.
Turn the temperature selector back to the Ú position.
2.
After the appliance is switched off, the cooling fan may
continue to run.

Clock display

&ORFN IXQFWLRQ EXWWRQ
Timer
Press the KJclock function button repeatedly until the KJ
1.
and Q symbols light up.
Set the duration using the rotary selector (e.g. †:‹‹ minutes).
2.
The setting is applied automatically. Then the clock is
displayed again and the minute minder starts counting down.
5RWDU\ VHOHFWRU
51