Connecting The Telescopic Tube; Adjusting Length Of The Telescopic Tube; Accessories - Cleanmaxx XL-306E-220 Mode D'emploi

connecting the telescopic tube

Adjusting length of the telescopic tube

Accessories

AttEntIOn!
❐ Always switch off the vacuum cleaner before changing nozzles.
The nozzles can be attached either to the telescopic tube or directly to the handle.
Floor nozzle
08186_DE-GB-FR-NL_V1.indb 22
All manuals and user guides at all-guides.com
1. Insert the curved end of the suction hose into the larger opening of
the telescopic tube. To ease insertion, twist the tube slightly back
and forth.
2. Insert the other end of the telescopic tube into the desired nozzle.
To ease insertion, twist the tube slightly back and forth.
1. Press the slide on the telescopic tube downwards and adjust the tube
to the desired length.
2. Release the slide and move the tube slightly up or down until it
engages.
The floor nozzle is suitable for both carpets and hard floors.
The foot switch allows you to change between carpet and hard floor. A
brush and a rubber lip are extended on the underside of the nozzle for
use on hard floors.
22
07.12.12 09:09