Adjusting The Suction Force; Exhaust Air Valve On The Handle; Finishing Cleaning - Cleanmaxx XL-306E-220 Mode D'emploi

1. Pull out the mains lead as far as required for cleaning.
cAutIOn: Do not pull out the cable with force up to its maximum length. It should not
be pulled out further than the red mark. The yellow mark indicates the optimum lead length.
2. Insert the mains plug into a plug socket.

Adjusting the suction force

Exhaust air valve on the handle

Finishing cleaning

1. After cleaning, press the on / off switch to turn off the vacuum cleaner.
08186_DE-GB-FR-NL_V1.indb 24
All manuals and user guides at all-guides.com
3. Press the on / off switch to turn on the vacuum cleaner. The vacuum
cleaner can be pulled along like a sledge during cleaning.
4. Guide the nozzle over the surface to be cleaned.
The suction force can be steplessly regulated as the adjusting wheel.
• Turn it in direction max to increase the suction force.
• Turn it in direction min to reduce the suction force.
The handle has an exhaust air valve with which you can quickly reduce
the suction force.
• Normally the exhaust air valve should be closed so that the suction
force is not unnecessarily reduced.
• Open the exhaust air valve when cleaning curtains, rugs or other light,
mobile items.
2. Remove the mains plug, hold the mains lead firmly and press the
button to retract the mains lead.
Holding the mains lead prevents and "whiplash" effect of the lead,
e. g. against your legs.
24
07.12.12 09:09