Operation - Cleanmaxx XL-306E-220 Mode D'emploi

Turbo nozzle
Hard floor nozzle
Crevice and brush nozzle

Operation

AttEntIOn!
❐ Never hold the nozzles, the handle or the telescopic tube close to parts of your body. You
could be stuck to the device. Should the vacuum cleaner become stuck, press the on / off
switch immediately to switch off the device.
❐ Switch on the vacuum cleaner only when you have checked that all the parts have been
properly attached and that the dust container and both filters are correctly installed.
❐ On no account should the device be used to suck up the following:
– Liquids or wet substances (e. g. wet carpet shampoo)
– Glowing ash, cigarette ends, matches, etc.
– Inflammable or explosive substances
– Very fine dust (e. g. concrete dust), ash or toner
– Pointed, hard objects such as large pieces of broken glass
08186_DE-GB-FR-NL_V1.indb 23
All manuals and user guides at all-guides.com
The turbo nozzle allows you to easily remove animal hairs and similar
soiling as well as to clean mattresses, beds, blankets and carpets.
The hard floor nozzle is suitable for smooth surfaces such as parquet
floors and tiles.
Fold over the end piece in the direction of the arrow to convert the
crevice nozzle into a brush nozzle:
• The crevice nozzle is suitable for upholstery, cleaning the inside of cars
and for all nooks and crannies that cannot be reached with the other
nozzles.
• The brush nozzle is suitable for all uneven objects, furniture, lamps,
profiles and skirting boards, window ledges, etc.
23
07.12.12 09:09