Cleaning The Hepa Exhaust Air Filter; Cleaning The Housing; Cleaning The Nozzles; Storage - Cleanmaxx CP-CY4207EP-7 Mode D'emploi

6. Then place the dust container into the device and close the dust container cover. The
cover must be heard to engage in place.

Cleaning the HEPA Exhaust Air Filter

1. Pull the fastener of the exhaust air hatch (C) upwards and
C
2. Remove the fi lter from the exhaust air hatch.
3. Tap the fi lter out over a dustbin. Clean the fi lter using a soft
4. Insert the fi lter back into the exhaust air hatch.
5. Then place the exhaust air hatch into the device and close the

Cleaning the Housing

If necessary, clean the housing using a slightly damp, soft cloth.

Cleaning the Nozzles

Remove hair and fl uff from the nozzles at regular intervals.

Storage

Store the vacuum cleaner in a dry, cool place indoors that is not accessible to children
and animals.
Tips for practical storage:
– Push together the telescopic tube as far as possible and, if
– You can attach the crevice and brush nozzle as well as the
08059_DE-GB-FR-NL_V3.indb 26 08059_DE-GB-FR-NL_V3.indb 26
detach the hatch from the device.
brush if necessary. You can also rinse the fi lter under clear,
lukewarm water. Attention: Do NOT use any detergent! Allow
the fi lter to dry completely.
hatch. The hatch must be heard to engage in place.
you have not already done so, place the fl oor nozzle onto the
telescopic tube. You can now hook the fl oor nozzle onto the
back of the device.
upholstery nozzle to the telescopic tube using the bracket that
is also supplied.
26
29.10.2014 09:29:43 29.10.2014 09:29:43