Measurement And Calibration Of The Ph - Chauvin Arnoux MPC 350 Notice De Fonctionnement

English
Press the
To set to desired value
Then on the
The instrument then returns to the
temperature measurement mode.
Note: adjustment from: 00.0 to 150.0

3.3 MEASUREMENT AND CALIBRATION OF THE pH

Precaution concerning the pH electrode:
Before each operation, make sure that the electrode is correctly connected.

Combined electrode to BNC jack (pH electrode)

Separate electrode, measurement electrode, to BNC jack (pH electrode),
reference electrode to 2mm yellow terminal (pH ref)
Liquid electrolyte electrodes will be filled with 1 mol.L
filling hole unplugged.
Check that there is no air bubble in the electrodes.
The glass bulb and the reference jonction will be immersed in the solution to be
measured.
52
or
key to validate.
key
20.0 6 – 7 et 8
20.0 *TC MAN*
-1
KCl and used with the
MPC 350 Multiparameter meter